To install Turbo C 2.01, follow these instructions:
1. Extract the zip file to a directory (e.g. C:\My Documents\TC201).
2. Move all the files in the subdirectories to the father directory.
e.g. Move the files in C:\My Documents\TC201\DISK1\*.* to C:\My Documents\TC201
Move the files in C:\My Documents\TC201\DISK2\*.* to C:\My Documents\TC201
Move the files in C:\My Documents\TC201\DISK3\*.* to C:\My Documents\TC201
3. Run INSTALL.EXE. When asked where the source files are located, type C and
then ENTER. The installation program will automatically find the path for you,
so just press ENTER.
4. Follow the instructions of the installation program.
5. After the installation, create a batch file in the directory where Turbo C
2.01 was installed just now (e.g. C:\TC\TC.BAT). Type these lines (c:\mytc is
just an example, where you are going to store your source files):

@echo off
path c:\tc;c:\windows;c:\windows\command
c:
cd \mytc
tc.exe

6. Create a shortcut to the batch file you created just now. Create a directory
that you specified in the batch file above.
7. Add the line to C:\CONFIG.SYS if it doesn't exist:
files=20

If the line shown above already exists, make sure the number on the right of
the equality mark is at least 20. Or, some errors may occur while Turbo C is
building some multi-file programs.
8. Run TC.BAT. Change the TAB key space to 4 (in the Options->Environment->Tab
size). Save the options (Options->Save options). It is recommended that you use
indent in your programs.
9. After the computer is restarted, all is done. Enjoy your Turbo C 2.01!

provided by Robbie Mosaic. For more information, please contact
dtsfan@citiz.net

p.s. Known bug in Turbo C 2.01: The Ctrl + F1 shortcut on "dos.h" would not be
responding.